EZGO GOLF CART CHARGE INDICATOR INSTALL
EZGO GOLF CART CHARGE INDICATOR ZIP

Also, check to make sure there are no wires in the way that can be severed during the installation. Once the hole is cut it will not be easy to undo it, so make sure that the spot you picked out is going to allow the meter to go in completely. If you are preparing to do an in-dash installation, you must check behind the proposed location to make sure that there are no obstructions to prevent the meter from going in completely. LED and digital style battery meters only come with about 6 to 12 in of wire pigtails, so you will need to add extra wire to reach the terminals necessary to power the meter.

EZGO GOLF CART CHARGE INDICATOR ZIP

if you use velcro strips or zip ties to secure your battery meter, you will need to snake the wires behind the console either through a hole you make or a handy crevasse in the dash. You always want to pick a spot that you can see the meter easily from the driver’s seat. Surface mounting your meter battery meter is the easiest method and may be best for your application. Choosing The Best Location To Mount The Battery Meter If it is a round gauge (analog or digital) it will need to be in-dash to look it’s best. If it is a square LED type, you can surface-mount or put it in-dash. Once you have acquired your battery meter, you will need to locate the best place on your dash to mount it, either surface mounted or in-dash.

EZGO GOLF CART CHARGE INDICATOR INSTALL

The digital meters will give you a number or a moving bar display a partial charge to a full charge.Ī battery meter is a great accessory to add to your golf cart and it only requires a minimum amount of skill to install it yourself. The input voltage comes directly from the battery bank through the signal wires, and in the case of analog meters, move the needle from empty on the far left too full on the far right. They act as a battery charge indicator as well and give a visual confirmation that the batteries are charging. They come in either analog or digital, square or round, surface or in-dash mount.īattery meters indicate the voltage level of your battery bank and inform you when it is time to recharge. Detailed Instructions:Ī battery meter (or battery gauge) is a device you add to your electric golf cart to read the state of charge level for your battery bank.

Mount the meter and arrange the wiring.

Run the wires from the meter location to the battery terminal points.

Prepare the opening if you are mounting in the dash.

Disconnect the positive terminal on the battery bank.

Once you have the meter of your choice, select the mounting location.

Select and obtain your battery gauge meter.

Steps to install a golf cart battery meter are:

Ezgo golf cart charge indicator